|
|
Post by rcsammy on Jul 12, 2005 5:20:44 GMT -5
the last few times i have taken my hyper 7 out i have done one run then filled it up tried to start it again ad it wont start? it only starts from cold  can anyone help |
|
|
|
Post by mt2jonny on Jul 12, 2005 10:53:21 GMT -5
Do you let the engine cool down before refueling? My truck does that too. I let sit and cool down for a little while and it fires right up.
|
|
|
|
Post by rcsammy on Jul 12, 2005 11:13:31 GMT -5
i dont let it cool down
but i used to fill it up straight away and it used to start no probs
|
|
|
|
Post by mt2jonny on Jul 12, 2005 11:24:58 GMT -5
it running hot then. you should let it cool down for at least 5min. after every run. i usually let mine cool down so i can touch the head. but if you do that you have to let the egine warm up again.
|
|
|
|
Post by rcsammy on Jul 13, 2005 5:19:51 GMT -5
it weird how its just started doing it though
|
|
|
|
Post by mt2jonny on Jul 13, 2005 11:00:19 GMT -5
maybe the engine is getting a little worn i don't know
|
|
|
|
Post by shephead on Jul 13, 2005 15:41:24 GMT -5
sounds like its running lean, i had a car that did the same thing, i finally figured out that it was too lean and running too hot, the fuel was boiling when it got to the carb, try running it a little richer, i think youll find it will cure the problem
|
|
|
|
Post by rcsammy on Jul 13, 2005 16:03:37 GMT -5
thanks ill try that
|
|
|
|
Post by mt2jonny on Jul 13, 2005 16:04:21 GMT -5
now that i think of it shephead you're right. i knew it was runnin hot
|
|
|
|
Post by rcsammy on Jul 14, 2005 13:37:40 GMT -5
ill try richening it next time i use it
|
|
|
|
Post by mt2jonny on Jul 14, 2005 13:44:22 GMT -5
hey what nitro% are you running?
|
|
|
|
Post by rcsammy on Jul 14, 2005 13:47:18 GMT -5
tornado 20%
|
|
|
|
Post by mt2jonny on Jul 14, 2005 13:53:14 GMT -5
ok iwas just wondering cause a lesser% means you have ti run it leaner
|
|
<marquee>
